APS will be exhibiting at the LI Power Electronics Symposium on Nov. 9

Engineers, Managers, Students and other Professionals involved in the use, design, qualification, test or manufacture of power supplies, power converters, power management or energy storage are invited. All sectors of power electronics are represented including military, industrial, medical, space, consumer and automotive.

This event is free for attendees but you must register in advance. Registered attendees will receive admission to the exhibit floor, technical lectures, complimentary lunch, and the networking event with complimentary hors d'oeuvres. The first 200 registered attendees will also receive a complimentary swag bag with gifts from our exhibitors.

The event will take place on Thursday, November 9, from noon to 8:00 PM, and attendees may arrive anytime and leave anytime. The venue is the Hauppauge Radisson located at 110 Motor Parkway, Hauppauge LI.

04/10/2017
li-power-electronics-symposium Engineers, Managers, Students and other Professionals involved in the use, design, qualification, test or manufacture of power supplies, power converters, power management or energy storage are invited. All sectors of power electronics are represented including military, industrial, medical, space, consumer and automotive.This event is free for attendees but you must register in advance. Registered attendees will receive admission to the exhibit floor, technical lectures, complimentary lunch, and the networking event with complimentary hors d'oeuvres. The first 200 registered attendees will also...
25/08/2017
aps-will-be-exhibiting-at-the-battery-show-exhibition-conference Applied Power Systems will be exhibiting at The Battery Show Exhibition & Conference.Booth 2145.September 12 – 14, 2017, Novi, Michigan, USA.The Battery Show Exhibition & Conference is a showcase of
 advanced battery technology for electric& hybrid vehicles, utility &
renewable energy support, portable electronics, medical technology,
military and telecommunications. Visit us at booth 2145
01/04/2016
aps-joins-largest-delegation-evr-to-hannover-messe-2016 Applied Power Systems, Inc. (APS) today announced it is part of the largest-ever U.S. delegation to Hannover Messe, the world’s foremost trade fair for industrial technology, taking place April 25-29, in Hannover, Germany. For the first time in the Fair’s history, the United States will be the Partner Country, a status that provides the more than 390 businesses and organizations in the U.S. delegation an unprecedented opportunity to be prominently featured throughout the event. President Obama will also participate in this year’s event, themed "Integrated Industry-Discover Solutions." APS will...
02/09/2015
aps-exhibiting-at-2015-the-battery-show APS will be exhibiting at The Battery Show co-located with the Critical Power Expo in Novi, MI September 15-17 in booth 2144.  Follow these links to learn more about the show:  http://www.thebatteryshow.com/ http://www.criticalpowerexpo.com/  
05/05/2015
aps-is-exhibiting-at-ipac Applied Power Systems will be exhibiting at the International Particle Accelerator Conference, you can learn more at: http://app.core-apps.com/ipac15/exhibitors/12e3b372e2b2f30a437d12c272df6922.  Download this app for a virtual tour of the conference: http://m.core-apps.com/ipac15
25/02/2014
bipolar-power-source-with-zero-crossover-distortion This bipolar power source with zero crossover distortion was developed to control beam positioning magnets in particle accelerators and scientific laser applications. This power source is a high precision linear amplifier that connects to and turns an ordinary DC unipolar voltage source into a precise bipolar power source with zero crossover distortion.  This class AB linear amplifier is rated at 160A @ 25V and contains less than 5mV p-p voltage ripple. Used in conjunction with an “off the shelf” unipolar voltage source, the supply produces a precision bipolar output...
18/02/2014
3200-amp-850vdc-rectifier-for-drilling-rig An Industrial customer had to design a drilling rig which would be powered by 3 diesel generators. APS supplied (2) 100-6758 air cooled, 3200A, 3 phase rectifiers to provide the 850VDC bus required by the VFD motor drives. We also provided (2) IAP2KD17 dynamic brake choppers to limit the DC bus voltage during the descent of the drawwork motor. The rectifier and brake choppers are standard APS products.  
17/09/2013
18-pulse-diode-bridge-rectifier-rated-for-1-100-amps Applied Power Systems manufactures this 18 Pulse Diode Bridge Rectifier which produces 1100 Amps DC Output for a customer's electroplating application.  The semiconductor rectifiers are parallel connected with bus bars and mounted on a high performance extruded heat sink assembly which is cooled by a double inlet centrifugal blower. APS utilized its existing capabilities in advanced thermal management to quickly design and manufacture this custom assembly for the customer.
17/09/2013
new-high-voltage-switch-rated-for-up-to-18-000v-10-000-amps Applied Power Systems produced this high voltage solid state switch by integrating standard / off-the-shelf products, including the BAP-1289 HV SCR Gate Driver Board, high voltage SCR semiconductor stack assembly and HV clamping system that minimizes both electrical and thermal resistance while ensuring the semiconductor maintains intimate contact with the heatsink and bus bars to achieve maximum performance from the devices. The unit is capable of switching 10,000 amps at 18,000V in pulsed operation and has been used in applications ranging from pulsing lasers to firing plasma...
02/09/2013
3-phase-diode-bridge-rated-for-for-3-000vdc-1-500-amps Applied Power Systems (APS) just built this 3-Phase Diode Bridge to meet the High-Power Rectification requirements of a diesel powered generator used in a traction motor application. Model # APE6D7 provides up to 1500 Amps DC output (max continuous) at 3,300 VDC. The unit has been ruggedized to withstand high shock and vibration. The customer integrates their own field-replaceable fan assembly to provide airflow to match the dimensions of our insulated frame, which directs airflow evenly across all heatsink surfaces for optimal thermal management.

High Power Inverters

High Power Inverters

5-500 kilowatt Inverters, AC Controllers and IGBT Inverters are available with Full Bridge, Half Bridge, 3-Phase Bridge, Chopper and Soft Start Circuits.  Options include Air or Liquid Cooled, Voltage Feedback, Current Feedback, Thermal Feedback, Snubbers,  Laminated Bus, DC Filter Capacitors, Fuses, and Blowers/Fans. Our Single Phase or 3-Phase Inverters are designed to fit a wide range of applications or custom designed to fit uniqe requirments.

High Power Converters

High Power Converters

Our High Power Converters are available in Single Phase, Three Phase, Poly Phase, AC Switch, Parallel Configuration and Static Switch configurations.  Options include Air or Liquid Cooled, Voltage Feedback, Current Feedback, Thermal Feedback, Snubbers, Laminated Bus, Filter Capacitors, Output Bus Bars, and Blowers/Fans.  These products are widely used for High-Power Motor Control, High-Power AC-DC Power Suppplies and High-Power DC-DC Power Supplies.

High Power Semiconductor Assemblies

High-Power Semiconductor Assemblies

Our High-Power Semiconductor Assemblies are available with Single, Doubler, Three Phase, Full Bridge, Series Stacks, Parallel, AC Switch, Static Switch, Common Anode/Common Cathode Topologies.  Options for include Air or Liquid Cooled, Bus Bars, Gate Firing Boards, Fuses, Snubbers, Blowers/Fans, Thermal Switches, Insulated Mounting and FiberOptic Interfaces. We offer a wide range of Power Semiconductors to satisfy a wide range of power management requirements.

 

IGBT and SCR Gate Driver Boards

IGBT and SCR Gate Driver Boards

Our IGBT and SCR Gate Driver Boards come in Full Bridge, Half Bridge, 3-Phase Bridge, Single, Doubler, Twelve Pulse, AC Switch and High Voltage Driver circuit boards.  Options for our IGBT and SCR Converters include Voltage Feedback, Current Feedback, Thermal Feedback, Device Fault Protection, Circuit Protection and FiberOptic Interface.  Our SCR and IGBT Controllers are made to fit a wide range of applications and can be quickly customized to meet unique applications.

Custom High Power Systems

Custom High Power Systems

We offer Custom High Power Systems design utilizing our years of experience with power component technologies.  We we can design build entire high power system with state of the art enclosures, digital / analog interface signals, control and monitoring circuitry.  Our advanced cooling techniques with baseplates, heatsinks, fans, blowers and liquid cooling devices ensure your custom power supply design will have the best in thermal management.